The BWB Flash Flame Photometer
The newest feature to Flame Photometry
Finally, a Flame Photometer specific to your needs. The first simultaneous Flame Photometer with built in compressor and configurable element analysis to your requirements.
The BWB Flash is the first and only fully configurable up to four channel flame photometer that detects and displays all calibrated ions at the same time.
The BWB Flash was created by combining the award-winning features of our XP model with new, innovative, and cutting-edge technology to provide unrivalled levels of accuracy, usability, and reliability while significantly reducing analysis time. When a different measurement is required, our customers do not need to waste valuable time changing filters and re-calibrating, as is a common requirement in all other Flame Photometer designs from 1951 to the present.
The Flash looks exceptionally modern, with clean lines and contemporary bright colour schemes that will fit into any laboratory. The instrument has a large 5” touch screen display that can be easily viewed from any angle and operated with most laboratory disposable gloves.
Our metal casework creates a sturdy portable instrument with nearly limitless future recycling possibilities. Of course, ROHS-compliant components and materials are used throughout.
The BWB Carbon Footprint is exceptionally low, in keeping with the company’s goals of being a responsible manufacturer, and we’ve succeeded in lowering the gas consumption rate by 13% while also lowering the electricity consumption (kWh) by 26% compared to previous model generations.
Unlike other manufacturers who charge extra for essential accessories, BWB includes everything needed to use the product right away. Simply add Gas!! (Propane, LPG, or butane) We also include data sharing via USB from the BWB Flash to your PC as standard. This connects the BWB Flame Emission Spectrometer (FES) output to the Internet or your company intranet systems, allowing for Distributed Control, which is critical for multinational corporations, universities, and government agencies.
BWB continues to improve our Flame Photometric systems in order to provide the market with unrivalled quality!
LARGE 5" TOUCH SCREEN DISPLAY COMPATIBLE WITH THE MAJORITY OF DISPOSABLE LABORATORY GLOVES
TRUE EASE OF USE WITH LARGE BUTTONS AND SIMPLE TO UNDERSTAND TEXT AND SYMBOLS
BUILT-IN AIR COMPRESSOR AND GAS REGULATOR
CALIBRATION STANDARDS SUPPLIED AS STANDARD IN 10,000PPM CONCENTRATIONS
AUTO-READ TECHNOLOGY ENABLES OPERATOR INDEPENDENT DETERMINATION OF RESULTS
USER SELECTABLE DECIMAL PLACES
IQ, OQ, PQ WE-BASED CERTIFICATION AVAILABLE: IQ OQ PQ is completely unique to the analytical instrumentation arena. Available in English, Russian, German, Mandarin, French and Spanish. More languages in development
COMPLETE SET OF BASIC LABWARE INCLUDED TO GET YOU STARTED
Available in 7 different models
Includes analysis of Sodium and Potassium
Includes analysis of Sodium, Potassium and Lithium
Includes analysis of Sodium, Potassium, Lithium and Calcium
Includes analysis of Calcium
Includes analysis of Potassium
Includes analysis of Lithium
Includes analysis of Sodium
2.5 – 4ml/min
Silicone and Tygon®
Required desk space for Instrument
101*cm (H) x 45cm (W) x 35cm (D)
*For Safety reasons the Flame photometer requires 1m of unobstructed space above to allow dissipation of heat from the chimney.
51cm (H) x 33cm (W) x 35cm (D)
(20in x 13in x 14in)
65cm (H) x 49cm (W) x 43cm (D)
(25in x 19in x 17in)
Flash Photometer – 10kg (22.1lbs)
Shipping – 18kg (39.7 lbs)*
*subject to vary based on accessories included
Single point calibration
Na 0.1 – 60ppm
K 0.05 – 100ppm
Li 0.05 – 50ppm
Ca 1.0 – 100ppm
Multi Point Calibration (with dilution)
Na 0.1 – 1000ppm
K 0.05 – 1000ppm
Li 0.05 – 1000ppm
Ca 1.0 – 1000ppm
<1% Coefficient of variability for 20 consecutive samples over ten minutes at concentrations of 100ppm or less. (After instrument stabilisation).
Na/K/Li = <1% to each other when equal in concentration at <100ppm
Limit of detection (LOD) and
limit of quantification (LOQ)
Na – 0.03ppm Na – 0.1ppm
K – 0.02ppm K – 0.05ppm
Li – 0.02ppm Li – 0.05ppm
Ca – 0.3ppm Ca – 1ppm
Time to stability
Less than 15 seconds after sample is introduced into the flame.
Simultaneous measurement of model specific elements
0-2.5 volt output (based on sample concentration linked to element of users choice)
Optional 4-20mA output in place of the above
Optional integrated printer
.csv and .pdf generated reports and files via FP-PC software
Recommended minimum warm up time based on ambient temperature
21ºC – 25 minutes
100V – 250V AC at 50 or 60Hz automatically selecting
Propane, Butane or Natural Gas* regulated to 19Bar. Flow rate of 0.4l/min
*with modifications. BWB Technologies recommends either Propane or Butane for optimum results.
5" colour capacitive touch screen display
WHAT’S IN THE BOX
Power lead to suit region
Manuals covering all aspects of the Flash FP
Quick start guides
Warranty registration form
Certificates of analysis for all provided fluids
Material safety data sheets for all provided fluids
The FP-PC software installation USB
150ml of BWB recommended cleaning solution
150ml calibration fluids for all relevant elements at 10,000ppm
100ml conical flask with screw lid
100 disposable sample cups
1L of de-ionised water
2m of waste tube
10 x 10ml pipettes
10 x 1ml pipettes