All 5 Channels of Detection and Display

The BWB Flash Flame Photometer

The newest feature to Flame Photometry

Finally, a Flame Photometer specific to your needs. The first simultaneous Flame Photometer with built in compressor and configurable element analysis to your requirements.

 

The BWB Flash is the first and only fully configurable up to four channel flame photometer that detects and displays all calibrated ions at the same time.


The BWB Flash was created by combining the award-winning features of our XP model with new, innovative, and cutting-edge technology to provide unrivalled levels of accuracy, usability, and reliability while significantly reducing analysis time. When a different measurement is required, our customers do not need to waste valuable time changing filters and re-calibrating, as is a common requirement in all other Flame Photometer designs from 1951 to the present.


The Flash looks exceptionally modern, with clean lines and contemporary bright colour schemes that will fit into any laboratory. The instrument has a large 5” touch screen display that can be easily viewed from any angle and operated with most laboratory disposable gloves.


Our metal casework creates a sturdy portable instrument with nearly limitless future recycling possibilities. Of course, ROHS-compliant components and materials are used throughout.


The BWB Carbon Footprint is exceptionally low, in keeping with the company’s goals of being a responsible manufacturer, and we’ve succeeded in lowering the gas consumption rate by 13% while also lowering the electricity consumption (kWh) by 26% compared to previous model generations.


Unlike other manufacturers who charge extra for essential accessories, BWB includes everything needed to use the product right away. Simply add Gas!! (Propane, LPG, or butane) We also include data sharing via USB from the BWB Flash to your PC as standard. This connects the BWB Flame Emission Spectrometer (FES) output to the Internet or your company intranet systems, allowing for Distributed Control, which is critical for multinational corporations, universities, and government agencies.

BWB continues to improve our Flame Photometric systems in order to provide the market with unrivalled quality!

FEATURES

 

  • LARGE 5" TOUCH SCREEN DISPLAY COMPATIBLE WITH THE MAJORITY OF DISPOSABLE LABORATORY GLOVES

 

  • TRUE EASE OF USE WITH LARGE BUTTONS AND SIMPLE TO UNDERSTAND TEXT AND SYMBOLS

 

  • BUILT-IN AIR COMPRESSOR AND GAS REGULATOR 

 

  • CALIBRATION STANDARDS SUPPLIED AS STANDARD IN 10,000PPM CONCENTRATIONS

 

  • AUTO-READ TECHNOLOGY ENABLES OPERATOR INDEPENDENT DETERMINATION OF RESULTS

 

  • USER SELECTABLE DECIMAL PLACES
     

  • IQ, OQ, PQ WE-BASED CERTIFICATION AVAILABLE: IQ OQ PQ is completely unique to the analytical instrumentation arena. Available in English, Russian, German, Mandarin, French and Spanish. More languages in development

  • COMPLETE SET OF BASIC LABWARE INCLUDED TO GET YOU STARTED

Just Add Gas
Cutout.png
Confused Person

Available in 7 different model 

FL-2.png

Includes analysis of Sodium and Potassium

FL-3.png

Includes analysis of Sodium, Potassium and Lithium

FL-4.png

Includes analysis of Sodium, Potassium, Lithium and Calcium

FL-C.png

Includes analysis of Calcium

FL-K.png

Includes analysis of Potassium

FL-L.png

Includes analysis of Lithium

FL-N.png

Includes analysis of Sodium

Close up of Flash Flame Photometer
Close up of Flash Flame Photometer
Close up of Flash Flame Photometer

Technical Data

Sample rate 

2.5 – 4ml/min

Tubing materials 

Silicone and Tygon®  

Required desk space for Instrument  

101*cm (H) x 45cm (W) x 35cm (D)

*For Safety reasons the Flame photometer requires 1m of unobstructed space above to allow dissipation of heat from the chimney.

Instrument size 

Flash Photometer
51cm (H) x 33cm (W) x 35cm (D)
(20in x 13in x 14in)

Shipping
65cm (H) x 49cm (W) x 43cm (D)
(25in x 19in x 17in)

Weight 

Flash Photometer – 10kg (22.1lbs)

Shipping – 18kg (39.7 lbs)*

*subject to vary based on accessories included

Optimal range

Single point calibration

Na 0.1 – 60ppm 

K 0.05 – 100ppm 

Li 0.05 – 50ppm 

Ca 1.0 – 100ppm

Multi Point Calibration (with dilution)

Na 0.1 – 1000ppm 

K 0.05 – 1000ppm 

Li 0.05 – 1000ppm 

Ca 1.0 – 1000ppm  

Reproducibility 

<1% Coefficient of variability for 20 consecutive samples over ten minutes at concentrations of 100ppm or less. (After instrument stabilisation). 

Specificity 

Na/K/Li = <1% to each other when equal in concentration at <100ppm

Limit of detection (LOD) and
limit of quantification (LOQ) 

LOD                     LOQ        

Na – 0.03ppm    Na – 0.1ppm

K – 0.02ppm      K – 0.05ppm

Li – 0.02ppm     Li – 0.05ppm

Ca – 0.3ppm      Ca – 1ppm

Time to stability 

Less than 15 seconds after sample is introduced into the flame.

Ions measured  

Simultaneous measurement of model specific elements

Interfaces  

USB

0-2.5 volt output (based on sample concentration linked to element of users choice)

Optional 4-20mA output in place of the above

Optional integrated printer

.csv and .pdf generated reports and files via FP-PC software

Recommended minimum warm up time based on ambient temperature  

21ºC – 25 minutes     

Power requirements   

100V – 250V AC at 50 or 60Hz automatically selecting 

Fuel requirement    

Propane, Butane or Natural Gas* regulated to 19Bar. Flow rate of 0.4l/min

*with modifications. BWB Technologies recommends either Propane or Butane for optimum results.

Readout  

5" colour capacitive touch screen display

WHAT’S IN THE BOX

 

  • Power lead to suit region

  • Gas hose

  • Aspiration kit

  • Manuals covering all aspects of the Flash FP

  • Quick start guides

  • Warranty registration form

  • Certificates of analysis for all provided fluids

  • Material safety data sheets for all provided fluids

  • The FP-PC software installation USB

  • 150ml of BWB recommended cleaning solution

  • 150ml calibration fluids for all 5 elements at 10,000ppm

  • 100ml conical flask with screw lid

  • 100 disposable sample cups

  • 1L of de-ionised water

  • 2m of waste tube

  • 10 x 10ml pipettes

  • 10 x 1ml pipettes

UK Flag