EUR + 44 (0)1787 273 451 US +1 (800) 608-9870
ME +357 22666080 WhatsApp +44 (0) 7496867237
The BWB BIO AV Flame Photometer
For biological applications
Purpose Built Flame Photometer
with specialised software, firmware
The BWB BIO AV is an offshoot of the popular BWB BIO. A simplified menu structure and enhanced Li detection make it a welcome addition to the BWB family. The ability to calibrate and measure Sodium, Potassium, and Lithium at the same time with the same dilution (from 1:6 to 1:100) streamlines throughput in many laboratories. We have retained the ability to enter and store two user-defined calibration curves should the user wish to readily measure differing sample types.
When connected to a PC with the BWB FP-PC app, the user can create .pdf files, .csv files, data presentations and reports that include all the key analysis data. The FP-PC Software also allows setup of the Automatic Fluid Handling System, AFHS, originally designed to work specifically with the BIO range of instrumentation.
The software enables you to view and edit the calibration curves. The intuitive user-friendly operation of the BWB BIO AV spans all languages and appeals to all levels of users. The BWB BIO AV is the must-have instrument in today’s research laboratory.
For sites that do not allow PCs or data acquisition in the test lab, the Printer provides the “hard copy” required for QA and QC purposes. The environmentally friendly print ink used by the printer has a minimum character capture life of 10 years. The printer is also compatible with other readily available paper stock.
To enhance accuracy and reproducibility there is an option to use either Caesium or Lithium as an Internal Reference System (IRS) that acts as an internal standard to adjust small changes during calibration and measuring.
SPECIALLY CONFIGURED FOR A
RANGE OF USER INTERESTS
“IRS” (INTERNAL REFERENCE STANDARD) CAESIUM OR LITHIUM OPTION
SINGLE POINT CALIBRATION CORRECTION
INTERNAL REFERENCE STANDARDS
10k PPM CALIBRATION STANDARDS FOR EACH ELEMENT
ANALYSING LI, NA AND K
OPERATOR INDEPENDENT DETERMINATION OF RESULTS
ADVANCED AUTOMATED DETERMINATION OF RESULTS
INTEGRATED PRINTER WITH ENVIRONMENTALLY FRIENDLY INK
IQ, OQ, PQ WEB-BASED CERTIFICATION STANDARD ON BIO AV AND AVAILABLE ON ALL BWB FES UNITS
2 – 3.5ml/min
Silicone and Tygon®
Na/K/Li = <1% to each other when
equal in concentration at <100ppm
Required desk space for Instrument
50cm (H) x 45cm (W) x 45cm (D)
For Safety reasons the Flame photometer requires1m of unobstructed space above to allow dissipation of heat from the chimney.
BIO AV Flame Photometer
51cm (H) x 39cm (W) x 35cm (D)
(20in x 15in x 14in)
65cm (H) x 49cm (W) x 43cm (D)
(25in x 19in x 17in)
BIO AV Flame Photometer 14kg (30.8lbs)
Shipping 25kg (55.1lbs)
Na – 0.0043 – 300mmol/l*
K – 0.0013 – 200mmol/*
Li – 0.0072 – 20mmol/l*
*With required Dilution Ratios
<1% Coefficient of variability for 20 consecutive samples over ten minutes
at concentrations of 100ppm equivalent
or less. (After instrument stabilisation).
Limit of detection (LOD) and
limit of quantification (LOQ)
Na – 0.0013mmol/l Na – 0.0043mmol/l
K – 0.0005mmol/l K – 0.0013mmol/l
Li – 0.003mmol/l Li – 0.0072mmol/l
Time to stability
Less than 15 seconds after sample
is introduced into the flame
Na, K, and Li
Recommended minimum warm up
time based on ambient temperature
21°C – 25 minutes
100V – 250V AC at 50 or 60Hz
Propane, Butane or Natural Gas*
regulated to 19Bar. Flow rate of 0.4l/min
*with modifications. BWB Technologies recommends either Propane or Butane for optimum results.
LCD, four line, alpha numeric, back lit.
WHAT’S IN THE BOX
USB PC Lead
Power lead to suit your region
Manuals covering all aspects of the BIO AV FP
Quick Start guides
Warranty Registration Form
IQ OQ PQ Kit ready to use
Certificates of analysis for all
Material Safety Data Sheets for
all provided Fluids
The FP-PC Software installation USB
150ml of BWB recommended
150ml calibration fluids for 3 elements at 10,000ppm.
150ml calibration fluid for internal
reference standard (Cs) at 10,000ppm
100ml conical flask with screw lid
100 disposable sample cups
1L of De-Ionised water
2m of waste tube
Set of spare fuses
10 x 10ml pipettes
10 x 1ml pipettes